ADL311SA – Compact & Economical Spray Dryer
Inquire productThe ADL311SA spray dryer is a compact and economical spray drying unit that efficiently micronizes liquid samples into powder. This spray drying unit is highly mobile on wheels and can also be used as a bench top unit.
Spray drying equipment has improved over the years. Today, you can process products from milk powder to antibiotics using spray dryers. Our spray dryer models are suitable for experimental and R&D purposes. You can use our spray dryers for drying, fine powdering, powder mixing, agglomerating, encapsulating, and englobing.
The ADL311SA is our most compact and affordable spray drying system which easily micronizes liquid samples into powder. This spray dryer unit is highly mobile on wheels and can also be used as a bench top unit. ADL311SA spray dryer is equipped with unique nozzle cooling mechanism, pulse jet mechanism, and a nozzle knocker to help you achieve stable and consistent spray drying.
All our spray dryers are carefully built to match your essential needs for a wide range of food, pharmaceutical and other small scale applications. Obtain a combination of high performance and mobile spray drying for an economical price with our ADL311SA spray dryer.
- Easy to setup and easy to operate.
- Suitable for heat sensitive samples as high heat is not directly applied to dry fine powder.
- Obtain contaminant free fine powder which is not oxidized and contains minimal moisture.
- Direct drying of solution or solution liquid into fine powder. No pre or post processes such as filtration, separation, or pulverization required.
- Safe and explosion free working is guaranteed in combination with GAS410 due to oxygen & pressure control within spray dryer.
- Organic solvents are recovered in a closed loop to protect the environment by minimizing pollution.
- Easy operation with one-touch detachable mechanism for drying chamber and cyclone.
- Standard equipped with arm jack for easy installation and removal of glassware attachments.
- A service outlet (max. 2A) and a sample stand are equipped as standard for connecting a magnetic mixer for stirring suspended liquid samples.
- Applications
-
- - Commercial Food Products
- - Pharmaceutical Products
- - Industrial Products
- Technical specifications
-
Supported samples: Water soluble samples Evaporated water amount: Max. 1300 mL/h Spraying system: Two-way nozzle, Nozzle No. 1A as standard (0.4mm) Temp. adjusting unit setting range: 40 to 220°C (inlet temperature), 0 to 98°C (outlet temperature) Temperature adjusting accuracy: Inlet temperature ±1°C Drying air amount adjusting range: 0 to 0.7 m³/min Spray air pressure adjusting range: 0 to 0.3 MPa Liquid sending pump flow rate range: 0 to 26 mL/min External output: Inlet temperature, outlet temperature, temperature outlet (4-20 mA) Touch panel: Blower, heater, liquid sending pump, pulse jet switch, error display Heater: 2.0kW (at 200V) to 2.88kW (at 240V) Exterior dimensions (WxDxH): 580 x 420 x 1125 mm Weight: 80 kg Power supply: (50/60 Hz) rated current AC220V 17A, AC240V 18A Switching of terminals necessary Included accessories: Silicon tubes (with a stopper) x 3, exhaust duct (with one hose band) x 1, outlet temperature sensor, spray air tube, sample box, static electricity removal earth, "Tetron" braided tube hose 5m (with two hose bands)
