DE & DT Series – Cleanroom Oven
Inquire productDE411 / DE611 / DT411 / DT611
Laboratory Oven is essential for general heating routines from drying food samples to curing microchips. Lab Oven is one of the fundamental instruments every laboratory should have.
DE & DT Series Class 100 forced convection cleanroom ovens feature advanced temperature control and uniformity for temperature testing in a dust-free environment. Rely on the DE & DT mechanical clean room ovens to carry out unmatched drying, sterilization, or any heating applications that require a temperature range of up to 360°C.
Improved visibility and operability with its V type controller.
Displays power consumption, CO2 emissions and heater manipulated variables on the control panel.
Adopts anti-fouling casters which prevents wheel contamination during transportation.
Improved visibility of HEPA filter replacement timing by three color indication.
Lower equipment height compared to previous models (DE/DT411 approximately ~200 mm shorter).
Larger cable port from φ30mm to φ33mm.
Improved optional accessories and more customization options.
Safety features:
Enhanced safety with its phase-reversal relay detecting incorrect power source at installation.
- Applications
-
- - Pharmaceutical Industry
- - Microbiological Culture Research
- - Cell Culture Research
- - Industrial Products
- Technical specifications
-
DE411DE611DT411DT611SystemForced air circulationOperating temperature rangeRoom temperature +30 to 260°CRoom temperature +30 to 360°CTemperature control accuracy±0.3°C at 260°C±0.3°C at 360°CTemp. fluctuation±0.5°C at 260°C±0.5°C at 360°CTemp. distribution accuracy±2.5°C at 260°C±4.0°C at 360°CTemp. gradient±10.0°C at 260°C±20.0°C at 360°CMax. temp. reaching time~70 mins.~80 mins.InteriorStainless steelExteriorCold rolled steel plate with melamine resin baking finishCable hole33mm×1 (right side)Exhaust port61mmDifferential pressure meterAnalog type (0 ~ 300Pa)HeaterStainless pipe heaterHeat insulation materialGlass woolHeater Circuit ControlTriac zero-cross controlFan Type / Fan MotorSirocco fan, Condenser motor 400WDoorSingle swing (left side)Door switchDoor open: fan motor and heater circuit off, Door close: fan motor and heater circuit onFilterHeat resistant HEPA filter (dust-collection efficiency >99.97% up to 0.3μm particle filtering)Caster wheels / adjusterFree swivel caster wheels without stopper / level adjuster (2 at front)SensorK-thermocouple double sensor (for temperature control and independent overheat prevention device)Temperature controlPID V control by microprocessorTemperature settingDigital setting with ▲▼ keysTemperature displayGreen 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (1°C resolution)Other indicationsLED indicates temperature patterns for heating/stabilizing/coolingTimer / timer resolution1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operationOperation function
Constant temperature operation, Programmed operation (Maximum 99 steps, up to 99 patterns, repeat operation function),
Duration/time select operation function (auto start/auto stop/quick auto stop, program operation)Additional functionsVariable fan speed, Accumulated on time, operation time function (up to 65,535 hours); calibration offset; accumulated power
consumption monitoring, total CO2 emission monitoring, heater output monitoring; power recovery; setting data save and restoreSafety deviceSelf-diagnostic functions (Detection for Temp. Sensor Failure, Triac Short Circuit, Automatic overheating prevention, Fan motor
failure detection, Heater Line Disconnect, Main Relay Contact Damage), Earth leakage breaker, Key Lock Function, Independentoverheating prevention device, Phase reversal relay, Door switchEarth leakage breaker15A20ALeak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mAInternal dimensions WxDxH450×450×450 mm600×600×600 mm450×450×450 mm600×600×600 mmExternal dimensions WxDxH700×1025×1570 mm850×1175×1720 mm700×1025×1570 mm850×1175×1720 mmInternal capacity91L216L91L216LShelf load capacity~30 kg/pc.Shelf rest step number / pitch12 steps / 30 mm17 steps / 30 mm12 steps / 30 mm17 steps / 30 mmPower supply (50/60 Hz)7A (no plug, round terminal)10A (no plug, round terminal)14A (no plug, round terminal)Weight~200kg~270kg~200kg~270kgShelfs and Brackets (stainless)2 pcs. / 4 pcs.3 pcs. / 6 pcs.2 pcs. / 4 pcs.3 pcs. / 6 pcs.
