+420 226 886 248

Odor test chamber

Inquire product

Proudct Purpose

Odor test chamber can be used to test and confirm the odor detection and testing with small sampling bag method of storage and usage of such products as electrician,electronics,automotive electrical materials,agricultural products and leather under high temperature.

Feature

Accurate control of temperature and wind speed is achieved through advanced controller,among which air circulation system within the chamber controls the direction and flow rate of air flow in the chamber,while program settings of the control system reaches the function of temperature change and provides the environmental conditions required for odor test automatically.High temperature chamber is sealed with low odor volatile materials or full welded,and its air should be exchanged with clean air outside.

Reference Standards

  • GB/T 2423.2-2001 Test B:High Temperature Test Method
  • GJB 150.3-1986 High Temperature Test
  • IEC68-2-2 Test B:Dry Heat
  • GB 11158 Technical Conditions of High Temperature Test Chamber
  • GB/T 2423.2 Basic Environment of Electric and Electronic Products Test Procedure Test B:High Temperature Test Method
  • QJQ 11052-2010 Oder Test Method for Interiors of Vehicles
  • MS 300-34 Odor Test Method for Interiors
  • GB/T18885-2009   Ecological Textile
  • QB/T2725-2005  Determination of Leather Odor
  • GB18401-2003  Specifications for Basic Safety Technology of National Textile 
Technical specifications
Model
V-0V-216
V-0V-768
V-0V-1000
V-0V-4000
V-0V-8000
Volume (L)
216
768
1000
4000
8000
Performance
Temperature range
Environmental temperature ±20℃ ~ +200℃
Temperature fluctuation
≦100℃, 0.4℃; ≦200℃, 0.8℃
Temperature deviation
≦100℃, ±1.5℃; ≦200℃, ±2.0℃
Heating-up time
Environmental temperature ±20℃ ~ +200℃
≦40min
≦60min
≦40min
≦60min
Dimension of the inside(mm)
W600×H600×D600
W830×H1200×D800
W1000×H1000×D1000
W2000×H1000×D2000
W2000×H2000×D2000
Dimension of the outside(mm)
W800×H1200×D1295
W1030×H1800×D1495
W1730×H1480×D1275
W2700×H1800×D2750
W2700×H2400×D3200
Temperature and humidity regulating method
Forced hot wind circulation Ventilation mode
Working environment temperature
(0 ~ +40)℃
Material
Shell
Double galvanized plates ,surface spray treatment
Inner tanks
Stainless steel  SUS201/8K ,Mirror plate
Heat perservation
Glass fibre
Heater
Ni Cr alloy fin type electric heater
Draught fan
Axial flow fan
Ventilation door
Manual switching(opening degree is adjustable)
Controller
Operation mode
Program operation controller
Setting range
0℃ ~ +210℃
Setting accuracy
0.1℃, 1MIN
Display resolution
0.1℃, 1MIN
Input
K type thermocouple
Operating interface
According to the setting mode
Controlling method
PID+SSR
Auxiliary function
Input disconnection detection detection function, upper limit temperature alarm function, buzzer alarm funtion, automatic temperature overheat prevention function,abnormal indication, alarm number display, self-diagnosis function and temperature and time keeping function.
Installed capacity(kw)
6
8
9
15
20
Power
AC380±10%V 50Hz 3 phases 4 lines+protective earth wire
Standard configuration
2 sets of sample holders, 1 piece of power line(6 meters long)and 1 set of rubber plug and cap of pin hole
Mounting devices
Leakage circuit breaker for the power, Overheat protector(Upper limit temperature alarm function, fan motor overheat protection swith, control circuit short circuit protection fuse and over temperature protector)
Optional
Pin hole(Φ50 /Φ100mm)
Rubber plug of pin hole(Φ50 /Φ100mm, cooperative use with pin hole)
Sample holder and holder, reinforced sample holder and holder,reinforced inner box and chassis, time meter and temperature grapher
Emergency stop switch, Remote monitoring operation,external alarm output terminal, exhaust flange and stainless steel exhaust elbow
Additional products for optional choice
Smell box
(patented product)
Standard odor smell chamber can be provided, uniform smell test can be realized, and accurate control of temperature, relative humility, wind speed and indoor air cleanliness can be provided. External standard gases can be controlled with micro elements such as solenoid valve(handle valve) and flowmeter, so that the result of smell test can be more stable, accurate, scientific and standardized.